Bathroom cleaners are produced in a range of formulations depending on the use, bath and tile cleaners, mould stain removers, limescale/rust removers, alkaline general purpose cleaners, these products are commonly formulated as ready to use sprays. Lankem offers a series of nonionic surfactants ideal for the use in formulations of a wide range of bathroom cleaners. The following formulations give superior performance in these applications:
| | Bath and Tile Cleaner |
| Lansurf COA | 5 |
| Citric Acid | 4 |
| Water | to 100 |
Charge the water followed by the citric acid, when fully dissolved charge the Lansurf CAO then mix until homogeneous. Spray the product onto soiled surfaces and allow to stand for 1-2 minutes, wipe off with a damp cloth or sponge before rinsing with water.
| | Mould Stain Remover |
| Lansurf COA | 5 |
| Sodium hydroxide (50%) | 1 |
| sodium metasilicate pentahydrate | 0.5 |
| Sodium hypochlorite | 14 |
| Water | to 100 |
Charge the water followed by the sodium hydroxide solution and sodium metasilicate, when fully dissolved charge the Lansurf CAO followed by the sodium hypochlorite solution then mix until homogeneous. Spray the product onto the mould stained area and allow to stand for 2-3 minutes, wipe off with a damp cloth or sponge before rinsing with water.
| | Lime/Rust Stain Remover |
| Lansurf COA | 10 |
| Phosphoric acid 85% | 12 |
| Water | to 100 |
Charge the water followed by the Lansurf CAO, then charge the phosphoric acid, mix until homogeneous. Whilst wearing gloves wipe the affected area with the product and rinse thoroughly with water, you can treat any heavier build-ups with the neat product. This product should not be used on marble, stone, terrazzo, metal or painted surfaces.
| | Alkaline Bathroom Cleaner |
| Lansurf AE109W | 0.5 |
| Lansurf CAO | 9 |
| Sodium carbonate | 2 |
| Propylene Glycol n-Butyl Ether | 1 |
| Sodium Citrate | to pH 10-11 |
| Fragrance preservative dye | as required |
| Water | to 100 |
Charge the water and dissolve the sodium carbonate, then charge the Lansurf CAO and propylene glycol n-butyl ether, with good agitation dissolve the Lansurf AE109W. When homogeneous add fragrance and preservative as you require. To use the spray on soiled surfaces, allow to stand for 1-2 minutes before wiping off with a damp cloth or sponge before rinsing with water.
